BEARING PULLER-FITTER
Illustrative photo
Some of the characteristics of the product, such as color or measurements, may vary from the photo. Please select the product finish at the bottom in the references or consult the section 'SEE PRODUCT IN CATALOG' to see more technical information.
MECHANICAL MAINTENANCE - SHAFT BEARING
Bearing puller-fitter Tool to pull out a bearing from the shaft and fit a new bearing in the same position. It is a manually operated hydraulic machine which does not require any dangerous operation such as the removal of the shaft. It is fast and eficient without damage to housing or shaft. The shaft remains in situ, the bearing can be extracted and a new bearing fitted in minutes. The equipment is designed to accept 2 basic size kits which cover bearing shell diameters up to 100 mm. (outer diameter). The kits are as follows: T8: for bearings with outer diameter not greater than 58 mm. (shaft about 45 mm.) T13: for bearings with outer diameter between 58 mm. and 100 mm. (shaft about 50-80 mm.)
Stock:
Available
Check availability
Not available
-
Different models
EXTRACTOR FOR GAS 75mm
/ ATTWOOD
-
Different models
EXTRACTOR 12V 100mm 6,7m3
-
Ref. 44250209
TURBO BLOWER FOR GAS EXTRACTION 12V
€21.42 -
Ref. 90890003
IN-LINE BLOWER FOR GAS EXTRACTION 12V
€16.66 -
Different models
BILGE BLOWER 90CFM 12V
-
Different models
IMPELLER PULLER 6-3/8"
-
Different models
MARINE BLOWER 12V 15A
/ JABSCO
-
Ref. 98000499
IMPELLER PULLER JOHNSON
/ JOHNSON - SPX
€192.05 -
Ref. 50250352
SLIDE HAMMER PULLER KIT
€176.32 -
Different models
EXTRACTOR 12V 550 MCB. W/O. SUPPORT FLA
-
Different models
IN-LINE BLOWER 230CFM 12V
-
Different models
EXTRACTOR 12V 550 MCB. WITH SUPPORT FLE
-
Different models
PROPELLER PULLER FOR SHAFTS 25 TO 38mm
-
Different models
MARINE BLOWER/EXTRACTOR 12V 15A
/ JABSCO
-
Different models
HELICOIDAL BLOWER ELL215/2 12V A-1 FLOW
/ GIANNESCHI
